Essential characteristics of noise
Sunday, May 10, 2009 News| Introduction | Noise in shadows | Noise in mid-tones | Noise in highlights | Summary | Annex |
At higher light levels, another phenomenon appears. Each pixel has its own analog gain factor, which is directly related to the physical size of certain capacitors. This phenomenon is called Pixel Response Non-Uniformity (PRNU).
The resulting
noise can be modeled as additive, with a standard deviation proportional to the
signal, i.e., 
.
The SNR in the highlight is approximately
where 
is a constant which is characteristic
of pixel non-uniformity.
This implies that the SNR does not increase further when PRNU becomes the main source of noise (which could always happen because PRNU increases faster than photonic noise). However, sensors always have a saturation value and PRNU is usually not the dominant source of noise at this value. Moreover, PRNU is a fix bias and can be compensated for with a calibration.
Color sensitivity is an integral value over the whole curve characteristic. In particular it depends on the noise in highlights. However, it also depends on the sensor’s spectral sensitivities which determines how the sensor can see the colors of the scene.
Further readings for the Essential characteristics of noise
To provide photographers with a broader perspective about mobiles, lenses and cameras, here are links to articles, reviews, and analyses of photographic equipment produced by DxOMark, renown websites, magazines or blogs.
|
We measure the performance of camera sensors that are capable of producing RAW images, be it in professional, semi-professional or consumer-level categories. We also measure the performance of interchangeable lenses for cameras equipped with such sensors. |